What is the best? Ranking 2022

Sharing is caring!

Among young musicians and not only, there are those who cannot afford wireless equipment to connect their guitar, electric bass or other instrument to the amplifier. The best electric guitar cable is therefore always relevant.

However, you cannot choose just any one: it is useless to buy a good musical instrument and then not have a suitable jack cable capable of adequately transmitting the electrical signal.

What is the best electric guitar cable?

The quality of a cable is represented by the sum of several factors.

It must first be shielded to prevent external electrical interference. In addition, the jack connector must be sufficiently resistant: it is above all the junction point that is put to the test due to the continuous stresses to which it is subjected.

The length is also important, because a long cable can be inconvenient in a small room and conversely, too short a cable may not be enough for live performances. However, keep in mind that the longer the cable, the more expensive it is.

Below we present to you best cables for electric guitar:

1. MPE guitar jack cable

The best for sound purity

MPE - Jack Cable...

The result of years of study, this cable guarantees the total absence of signal loss and the maximum purity and brilliance of sound in terms of quality. It is a linear model for assembled instruments with an external diameter of 6.5 mm, with an internal conductor of 0.25 mmq of low impedance OFC red copper.

It has an insulating graphite shielding braid, assembled with 2 mono D 6.3 mm jacks. It is completely welded by hand in Italy and has a length of 5 meters.

2. Stagg Pro-Series Deluxe Cable

Ideal for its extra length

Freedom of movement is guaranteed, thanks to the considerable length of this cable: 10 meters!

Manufactured to RoHS compliance, this is a deluxe single-ended, connector-to-connector cable, designed with a phono plug and an angled phono plug. Reduces noise interference.

3. Ultra HDTV audio jack cable

Best for lack of interference

Ultra-HDTV Cable...

This plug and play cable is compatible with instruments equipped with a 6.3 mm jack output: bass, guitar, keyboard, synthesizer…

It is manufactured and tested in Germany. It comes with gold-plated, double-insulated, double-coated connectors for optimal, interference-free transmission. It is available in different sizes.

4. Ernie Ball Right Angle Braided Guitar Cable

The best for remarkable robustness

Ernie Ball, Cable...

Made with top quality components, it is made to last over time. Dual drivers deliver clear, reliable sound with crisp highs, tight mids, and rich harmonics. Multiple shielding materials preserve signal with reduced operating noise.

Thanks to the braided exterior, the cable won’t get tangled. It has a length of about 5.5 meters.

5. Rayzm Guitar Jack Cable

Ideal for effective insulation

Cable Jack Rayzm...

It is equipped with a 22AWG pure oxygen-free copper conductor wrapped with 5 layers of protective and insulating material and an outer layer of fabric. This minimizes background noise for clear sound.

The fabric covering not only enhances its aesthetics, but also provides adequate protection against cuts and breaks caused by frequent twisting. It has two 1/4 inch (6.35mm) jacks, one of which is right angle, with a nickel finish.

The welds are covered with a heat-shrink sheath which improves their durability and protects against humidity and dust. With a length of 5 meters, it is UL certified and manufactured according to Rohs standards.

6. Mogami Enoaudio Jack Cable for Professional Guitar

The best for maximum signal fidelity

Mogami 2524 ...

It is characterized by an internal conductor made up of 50 individual cables, which guarantee maximum flexibility and durability. The use of high purity copper (OFC) guarantees maximum signal fidelity.

The extreme density of the spiral shield, together with a second carbon (PVC) shield, effectively prevents electromagnetic and mechanical interference. The cable is made in Japan by Mogami and individually assembled in Germany by Enoaudio.

Each cable undergoes extensive testing before delivery to ensure product quality. Enoaudio offers a 10 year warranty on these cables from the date of purchase.

See also  Cervical vertigo: how to recognize it and possible causes

Electric Guitar Cable Features

A cable that connects an electric guitar to a booster it is basically a piece of shielded wire with an inside diameter of ¼ of thumb (6.35mm). This is normalized thickness, which means they all effectively have the same low impedance and signal resistance.

best electric guitar cable

A standard cable consists of 5 basic parts:

  • the central conductor cable, which carries the audio signal via electric current
  • a front sheath from isolationwhich contains the current keeping it isolated from other parts
  • a electrostatic shieldingwhich reduces handling noise that occurs when a cable is flexed or compressed
  • a braided copper shieldthat blocks interference from external sources
  • the outer sheath, which protects all internal parts and gives the cable its “finished” appearance.

The main reason high-end cables cost more is the materials and manufacturing methods used to construct each of these 5 pieces.

How to choose electric guitar cable

But don’t think that electric guitar cables are all the same. Companies have found several ways to differentiate themselves, increasing the value, durability and quality of their products.

electric guitar cable

Here are some important points to consider when buying.

Jack

It doesn’t matter how good the cable, shield and jacket are… if the connectors are poor quality, they won’t transmit a clean signal. The best jacks use thegold. At the intermediate level, there is the copper.

Connectors lower quality use steel or other materials.

Also choose the right connector:

  • if your guitar has an output XLRuse it
  • otherwise you have to use a phono socket, mono or stereo
  • use a TRS (Tip-Ring-Sleeve) phone connector if your guitar provides a balanced output (see owner’s manual). Most are unbalanced (if it’s not mentioned, it’s supposed to be).
  • if you need a phono adapter, consider whether you need a straight connector or a inclined. This is often a personal choice, but some guitars can only be used with a straight connector.

Core

Also called core, it is the innermost part of the cable. It is used to transmit the signal from the end connector of the guitar to the other end.

See also  memory, latex, polyester, cotton or feathers?

Copper is the best material to use for this component. In general, a thicker gauged core is preferable to a thinner core of the same material.

shielding

This is the part that wraps around the core and prevents external electromagnetic signals from interfering with the signal from the instrument.

The shield acts at the level of noise reduction and it also maintains the guitar signal inside the cable: it thus makes it reach the other end without being dispersed.

Braided shields provide better resistance to external signals, but reduce flexibility. The spiral armor offers a good balance between shielding and flexibility. Aluminum foil shielding is the least expensive, but it’s also more prone to breaking and creating stiff cables.

Sheath

It is the outermost soft part. Generally, we prefer it to be strong and durable, without being too rigid.

Length

It is not recommended to choose a audio cable huge. The longer it is, the greater the signal loss, especially in the rendering of high-pitched sounds.

If you notice an annoying hiss coming from the amplifier, you probably need a shorter cable.

Robustness

Sound quality isn’t everything – durability and reliability are also an important factor.

At parity of sound qualityit is better to buy a cable at 20 euros per meter which lasts a whole year rather than a cable at 5 euros per month which breaks after a month.

Manufacturing quality

There are many differences between a premium model and a budget model:

  • electrical hum protection. For a low-cost product, the best defense against audio hum is to wrap more coiled cables away from power sources such as amplifiers, power splitters, and similar devices.
  • isolation. It is usually created using thermosetting materials such as neoprene and rubber or thermoplastic materials such as polypropylene and polyethylene. This factor does not affect the quality of the audio signal, but does play a role in flexibility, making the cable less prone to breakage and therefore more durable.
  • jack connectors. They can be made of different materials and can affect the sound. The premium material is gold, which, among other things, is not afraid of corrosion.

Leave a comment

1 × four =